Char-Lynn spool valve motors
TECHNOLOGY
Gerotor/Geroler
DISPLACEMENT
5-22.8 cc (0.3 to 1.4 cu in)
CONTINUOUS PRESSURE RATING
200 bar (2,900 psi)
Optimized for smooth performance
Char-Lynn spool valve motors distribute pressurized fluid into and out of the Orbit gear set via valve slots integrated into the output shaft. You can optimize the valve for low-flow, low-speed needs to ensure smooth operation.
Designs based on the Orbit Principle
Our premium line of Char-Lynn motors feature a design based on the Orbit Principle, in which an internal gear rotates inside of an external fixed gear. These gerotor motors are known for their reliable high-power density, modularity and economic design.
A wide range of displacement and pressure options
Select from four series to find a spool Geroler motor to meet your design needs.
APPLICATIONS:
|
GENERAL SPECIFICATIONS
PRODUCT NAME
Eaton Char-Lynn H Series Spool Geroler
CATALOG NUMBER
101-1003-009
MODEL CODE
MH0059BA01AB0000000000000AA00J
PRODUCT LENGTH/DEPTH
6.72 in
PRODUCT HEIGHT
3.87 in
PRODUCT WIDTH
3.31 in
PRODUCT WEIGHT
11.8 lb
WARRANTY
Hydraulics Warranty
PRODUCT SPECIFICATIONS
TORQUE
155 Nm
SPECIAL FEATURES (HARDWARE)
None
INTERMITTENT PRESSURE
165 bar
SEAL OPTIONS
Standard
GEROLER OPTIONS
None
IDENTIFICATION
None
DESIGN CODE
9
PORT TYPE
.500-14 NPTF Dryseal Pipe Thread Ports
VALVE OPTIONS
None
SPEED SENSOR
No
RECOMMENDED SYSTEM WORKING TEMPERATURE
-34°C to 82°C
FRONT SEAL KIT IF AVAILABLE
60540-000
VISCOSITY RECOMMENDATION
100 SUS
MOUNTING TYPE
4 Bolt Std - 44.40 [1.748] Dia. X 3.05 [.120] Pilot, .375-16 UNC-2B Mounting Holes On 82.55 [3.250] Dia. B.C.
PRODUCT MATERIAL
Cast Iron
FLOW RATE
57 l/min
MAXIMUM SPEED
585 RPM
PAINT
Primer Low Gloss Black
SPECIAL ASSEMBLY INSTRUCTIONS
None
DISPLACEMENT
96 cm³/rev
TWO SPEED RATIO
None
CASE FLOW OPTIONS
None
OUTPUT SHAFT TYPE
Straight
PRESSURE/FLOW OPTION
None
PACKAGING
Individual Box
SHAFT OPTIONS
None
APPLICATION
Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
LOW PRESSURE RELIEF
None
BRAKE TYPE
Hydraulic
PRODUCT SPECIFICATIONS:
|
Feature |
Code |
Description |
|
PRODUCT |
M |
MOTOR |
|
SERIES |
H0 |
H SERIES MOTOR |
|
DISPLACEMENT |
59 |
96 CM3/R [5.9 IN3/R] |
|
MOUNTING TYPE |
BA |
4 BOLT STD - 44.40 [1.748] DIA. X 3.05 [.120] PILOT, .375-16 UNC-2B MOUNTING HOLES ON 82.55 [3.250] DIA. B.C.(No pilot with Extreme Duty Seal) |
|
OUTPUT SHAFT |
1 |
25.4 [1.00] DIA. STRAIGHT, WOODRUFF KEY, .250-20 UNC-2B HOLE IN SHAFT END |
|
PORT TYPE |
AB |
.500-14 NPTF DRYSEAL PIPE THREAD PORTS |
|
CASE FLOW OPTIONS |
0 |
NONE SPECIFIED |
|
GEROTOR OPTIONS |
0 |
NONE |
|
SHAFT OPTIONS |
0 |
NONE |
|
SEAL OPTIONS |
0 |
STANDARD SEALS |
|
SPEED SENSOR OPTIONS |
0 |
NONE |
|
VALVE OPTIONS |
0 |
NONE |
|
SPECIAL FEATURES (HARDWARE) |
0 |
NONE SPECIFIED |
|
SPECIAL ASSEMBLY INSTRUCTIONS |
0 |
NONE |
|
PAINT/PACKAGING OPTIONS |
AA |
PRIMER LOW GLOSS BLACK |